Jump to content


< Back to Forum


 

Inband Signaling


  • Please log in to reply

#1 SupportTeam 10 September 2005 - 09:51 AM

Cecile wrote:

We ordered and received the license for a 4-line enterprise. It is assigned to an analog card on as separate computer.
This system receives internal calls.
I am having trouble getting the extension number.

The Inband Signaling Definition File is as listed below

; Inband Signaling definition file for:
; SRVS Samsung System

Pattern=??*?#?#?#?
RV=Inband_ExtNo,5,6,Inband_CallerKeypress,10,100



The question remarks represent odd characters. When I call from extension '213' the following is in the voiceguide log. How do I retrieve '213' from '[213哴' Within Voiceguide modules I have tried a VBS script using string operations and I get an error of invalid character.

As always any help would be appreciated.


103212.82 2 Inband detection start (1 patterns loaded)
103212.82 2 timer set 5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103212.82 2 tw DialogicEvent 135,TDX_SETHOOK,0,0,0,DX_OFFHOOK,CALL_INBOUND,
103212.82 2 event TDX_SETHOOK, code=135, state=4100
103212.82 2 LsIndialSignalCapture EV_UNKNOWN_135
103212.82 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103212.82 2 tw DialogicEvent 134,TDX_CST,17690,0,0,DE_LCON,,
103212.82 2 event TDX_CST, code=134, state=4100
103212.82 2 LsIndialSignalCapture EV_UNKNOWN_134
103212.82 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103212.98 2 tw dtmf * (2,42,42)
103212.98 2 event *, code=42, state=4100
103212.98 2 LsIndialSignalCapture * 噯
103212.98 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103212.98 2 tw DialogicEvent 134,TDX_CST,42,0,0,DE_DIGITS,,
103212.98 2 event TDX_CST, code=134, state=4100
103212.98 2 LsIndialSignalCapture EV_UNKNOWN_134 噯*
103212.98 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103213.27 2 tw dtmf 2 (2,50,50)
103213.27 2 event 2, code=50, state=4100
103213.27 2 LsIndialSignalCapture 2 噯*
103213.27 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103213.27 2 tw DialogicEvent 134,TDX_CST,50,0,0,DE_DIGITS,,
103213.27 2 event TDX_CST, code=134, state=4100
103213.27 2 LsIndialSignalCapture EV_UNKNOWN_134 噯*2
103213.27 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103213.57 2 tw dtmf 1 (2,49,49)
103213.57 2 event 1, code=49, state=4100
103213.57 2 LsIndialSignalCapture 1 噯*2
103213.57 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103213.57 2 tw DialogicEvent 134,TDX_CST,49,0,0,DE_DIGITS,,
103213.57 2 event TDX_CST, code=134, state=4100
103213.57 2 LsIndialSignalCapture EV_UNKNOWN_134 噯*21
103213.57 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103213.87 2 tw dtmf 3 (2,51,51)
103213.87 2 event 3, code=51, state=4100
103213.87 2 LsIndialSignalCapture 3 噯*21
103213.87 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103213.87 2 tw DialogicEvent 134,TDX_CST,51,0,0,DE_DIGITS,,
103213.87 2 event TDX_CST, code=134, state=4100
103213.87 2 LsIndialSignalCapture EV_UNKNOWN_134 噯*213
103213.87 2 timer set 0.5 EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103214.41 2 timer fired EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT
103214.41 2 event EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT, code=9011, state=4100
103214.41 2 LsIndialSignalCapture EV_TIMEOUT_INBANDSIGNAL_INTERDIGIT 噯*213
103214.41 2 Inband [噯*213哴 matched by pattern [??*?#?#?#?]
103214.41 2 Inband [Inband_ExtNo] = [213哴
103214.41 2 rv add [Inband_ExtNo]{213唥
103214.41 2 Inband [Inband_CallerKeypress] = [哴
103214.41 2 rv add [Inband_CallerKeypress]{唥


#2 SupportTeam 10 September 2005 - 10:35 AM

Looks like there was a bug in the VoiceGuide for Dialogic's Inband Signalling detection.

Please update to attached version of .exe and change the Inband Signalling pattern to be:

*###

This new version also requires that the file MSCOMM32.OCX is on the system. That file is usually found on most systems. If it is not on yours let us know and we will post it here as well.


#3 CeceJ 12 September 2005 - 10:51 PM

I do not have MSCOMM32.OCX on my system.
Thanks

#4 SupportTeam 13 September 2005 - 06:12 AM

Place MsComm32.ocx in Windows' \System32\ subdirectory

Open a DOS Command Window. (Start->Programs->Accessories->Command Prompt)

Change to Windows' \System32\ subdirectory using command:

cd c:\Windows\System32

and run the following command:

regsvr32 MsComm32.ocx